FAA Part 107 & Part 137 Certified
1645 Mardon Dr. Dayton, OH(937) 555-0199
Reid Aeroworks
Drone Services & Technology
Survey-Grade Drone Aerial Mapping, LiDAR & Site Layout
Division 05•GREATER DAYTON, OHIO
COMING SOON • PHASE 2 LAUNCH

SURVEY-GRADE DRONE AERIAL MAPPING, LIDAR & SITE LAYOUT

Replace days of manual walking topo shots with high-density aerial photogrammetry and LiDAR. Tied into Ohio State Plane South (NAD83) via RTK/PPK and local ground control points, we deliver sub-centimeter 2D orthomosaics, cut/fill earthwork tracking, volumetric stockpile audits, and blueprint-over-ortho progress maps.

Drone Aerial Mapping
● COMING SOON
REID AEROWORKS // DIVISION 05 • COMING SOON
Drone Aerial Mapping
High-res 2D Orthomosaic & 3D Photogrammetry Mesh on low end; Volumetric/CAD deliverables on high end ($650 minimum).
Deliverables
GeoTIFF, .OBJ, .LAS point clouds, .DXF contours
Earthwork
Cut/fill tracking & automated grid flight paths
Site Management
Weekly progression & blueprint overlays
Standard Operating Procedure

4-PHASE MISSION EXECUTION

01

Coordinate System & GCP Placement

Establish Ohio State Plane South (NAD83 / NAVD88) control or tie directly into your site engineer's localized localization benchmark.

02

Terrain-Following RTK Grid Capture

Execute dual-grid and terrain-aware flight lines with mechanical global shutter to eliminate motion blur.

03

Photogrammetric / LiDAR Processing & Classification

Strip vegetation, vehicles, and equipment to generate bare-earth Digital Terrain Models (DTM) and 1-foot CAD contours.

04

Browser 3D Portal & Civil 3D Export

Deliver shareable cloud map links for project stakeholders alongside raw .DXF/.LAS/.TIFF files for engineering teams.

Standard Deliverables Packet

  • High-Resolution Georeferenced 2D Orthomosaic (GeoTIFF, <0.8 in/px GSD)
  • Classified 3D Point Cloud (.LAS / .LAZ) & Textured 3D Mesh (.OBJ / .FBX)
  • 1-Ft & 0.5-Ft Elevation Contours (.DXF / .DWG) for Civil 3D & Carlson
  • Volumetric Stockpile & Cut/Fill Earthwork Balance Report (Cubic Yards / Tons)

Assigned Airframes & Support Gear

  • Survey-Grade RTK Mapping Aircraft with Mechanical Global Shutter (4/3" 20MP & 45MP Full-Frame)
  • Zenmuse L2 Aerial LiDAR + IMU Payload (Canopy Penetration for Wooded Tracts)
  • Multi-Band GNSS RTK Rover + High-Contrast AeroPoint Ground Control Targets

Built For

  • Excavation, Grading & Heavy Civil Contractors
  • Commercial Developers, Homebuilders & Site Superintendents
  • Aggregate Quarries, Sand & Gravel Pits & Asphalt Plants
  • Civil Engineers, Land Surveyors & Environmental Consultants
REID AEROWORKS Pricing Engine

INSTANT MISSION INVESTMENT ESTIMATOR

50 Acres
Min: 5 AcresMax: 500 Acres
3. Optional Mission Enhancements
Estimated Project Range
$1,250 – $2,500

High-res 2D Orthomosaic & 3D Photogrammetry Mesh on low end; Volumetric/CAD deliverables on high end ($650 minimum).

Included Deliverables:
High-Resolution Georeferenced 2D Orthomosaic (GeoTIFF, <0.8 in/px GSD)
Classified 3D Point Cloud (.LAS / .LAZ) & Textured 3D Mesh (.OBJ / .FBX)
1-Ft & 0.5-Ft Elevation Contours (.DXF / .DWG) for Civil 3D & Carlson
Lock In Formal Proposal
Greater Dayton Dispatch

REQUEST A FLIGHT SCOPE & PROPOSAL

Direct Ops Desk: (937) 555-0199
Mailing: 1645 Mardon Dr. Dayton, OH